|
Free
Software
Feel free to make
use of any software on this page. These programs have been
developed to make
the process of determining your exact requirements easier and quicker and offers
valuable, useful tools in cladding/cold rolled design and specification.
We hope you find them to be of use.
Download
Instructions:
Upon clicking the
download link, you will be prompted to
Save the file to your PC's hard disk or Open from this
location. Select Save and specify a location on your PC to
save the file to. Z-Master and Roof Calculator require
installation after the download has completed. The order forms are
run directly from the downloaded files. For more info click the link under each listing.
If you encounter
difficulties in using any of our software, contact our
sales department who will be glad to offer assistance.
|
Z-Master
|
Available shortly
|
|
Z-Master is our
cold rolled specification software which assists in choosing the
right sections for your application. It takes into account
bay centres, purlin centres, snow loading and wind up lift etc.
Once all required information has been entered into the
program, it will produce a list of optimum sections for the
required
application.
[more
info] |
|
|
Roof Calculator
Suite |
Available shortly
|
|
Roof Calculator
is an indispensable (4 functions-in-1) tool for quickly calculating
a variety of dimensions for specific roof types and other
applications. Roof Calculator performs calculations
when dealing with the following;
- Dutch
Roofs
- Gable
Ends
- Roof
Dimensions
-
Curved
Eaves
|
|
|
Purlin order
form |
Available shortly
|
|
The Purlin order
form will allow you to specify hole locations of individual
purlins in an intuitive, easy to use interface. The
information can then be output and sent to our sales
department. You will need MS Access (version 2000 and above)
in order to use this order.
[more info] |
|
|
C-section order
form |
Available shortly
|
|
The C-section
order form will allow you to specify hole locations of
individual sections in an intuitive, easy to use interface.
The information can then be output and sent to our sales
department. You will need MS Access (version 2000 and above)
in order to use this order.
[more info] |
|
|
Eaves Beam order
form |
Available shortly
|
|
The Eaves Beam
order form will allow you to specify hole locations of
individual Eaves Beams in an intuitive, easy to use
interface. The information can then be out and sent to
our sales department.
You will need MS Access (version 2000 and above) in order to
use this order.
[more
info] |
|